EN gaps check

in Arbeit IN ARBEIT 

Preamble

With this function it is possible to check the process numbers of all the fillings of a selected card reader in a selected periode for gaps and/or irregularities. Most card readers have continuous process numbers, e.x. 1-999 or 1-9999. Gaps could occur when fillings are being deleted manually or fillings haven't been polled from the card reader or fillings haven't been provided by the card reader.

Menu call up

Settings

• selection of a periode in which shall be checked

• selection of a card reader which fillings shall be checked

Not every card reader type has continuous process numbers, like the TA2003 or Inosmart, and therefore cannot be checked with this function !

• activation whether manually entered fillings shall be affected/checked too.

Result

The result can be printed and/or stored as PDF file for further processing. Also see print function.

Description of the possible displayed reasons

* Nummernbereich:	There are process numbers outside the normal process number range of this card reader types.	E.x.: the TA2331R3 has a process number range of 1-999. The check result was a process number 1234.	irreglarity
* Lücke:	The listed process numbers are missing from the datetime of the last filling before the identified gap		gap
* außerhalb:	Internally not all process numbers are being checked in one step for gaps or irregularities, but in mid session steps of 50 numbers each.	E.x.: the process numbers 100-850 are being checked in total, but the mid session check of 100 to 150 has the prcoess number 152 included.	irreglarity
* Typwechsel (Hinweis):	There is a gap due to a change of the card reader type.	E.x.: last filling TA2331R3 was 456, then the Heconomy was installed and the first filling from the Heconomy is 1.	gap
* Doppelter Satz (Hinweis):	The listed process numbers exist two times.		irreglarity