EN polling process limits and mileage input: Unterschied zwischen den Versionen

Version vom 28. Oktober 2020, 11:44 Uhr

in Arbeit IN ARBEIT

Preamble

When working with card limits (exception "limit per fill") and/or input of mileage values at the card reader/s, then the polling process has to be adapted respectively organised in a specific way.

Explanations

When working with more than one card reader, these card readers are not connected between each other. So a card reader does not know who and when a filling has being done at one of the other card readers.

When working with a periode limit, which is being managed via Autopoll, the filling limit will be calculated everytime anew. So all fillings of all card readers have to be transmitted to Autopoll before the new limit calculation.

When working with mileage input at the card reader, all fillings of all card readers have to be transmitted to Autopoll before the highest mileage value can be saved in the corresponding vehicle and the actual mileage value can be transmitted to all card readers.

Polling process when working with limits and/or mileage input at the card reader

Polling 1

only polling of all fillings from all card readers

NO polling of cards

When all fillings are being polled from all the card readers, the card limits will be calculated anew and/or the mileage values (only higher values) are being saved in the corresponding vehicles.

Polling 2

transmitting of the changed cards only to all card readers

Periode start when working with card limits

At the start of a new periode (e.x. on the first day of a month when dealing with a monthly limit), the card limits change just because a new month starts. The card limits will be set to the starting value. So at the start of a periode it is absolutely necessary to execute "Polling 1" first and afterwards "Polling 2" as explained above. But when executing "Polling 2" at this moment, ALL cards have to be transmitted to ALL card readers.

@@ Zeile 6: / Zeile 6: @@
 ==Explanations==
-* Beim Einsatz von mehreren Tankautomaten sind die Tankautomaten nicht untereinander verbunden und wissen nicht wer an den anderen Tankautomaten getankt hat.
+* When working with more than one card reader, these card readers are not connected between each other. So a card reader does not know who and when a filling has being done at one of the other card readers.
-* Beim Periodenlimit, welches über Autopoll verwaltet wird, wird der Abtankungswert immer neu berechnet, d.h. es müssen vor der Berechnung immer alle Tankungen vorliegen.
+* When working with a periode limit, which is being managed via Autopoll, the filling limit will be calculated everytime anew. So all fillings of all card readers have to be transmitted to Autopoll before the new limit calculation.
-* Bei der Eingabe von KM-Ständen am Tankautomaten, müssen erst alle Tankungen vorliegen, bevor der höchste Kilometerstand im Fahrzeug hinterlegt und dieser Kilometerstand dann an alle Tankautomaten gesendet werden kann.
+* When working with mileage input at the card reader, all fillings of all card readers have to be transmitted to Autopoll before the highest mileage value can be saved in the corresponding vehicle and the actual mileage value can be transmitted to all card readers.
 ==Polling process when working with limits and/or mileage input at the card reader==