EN polling process limits and mileage input
Version vom 27. Oktober 2020, 16:49 Uhr von Oehlstoeter (Diskussion | Beiträge)
IN ARBEIT
Preamble
When working with card limits (exception "limit per fill") and/or input of mileage values at the card reader/s, then the polling process has to be adapted respectively organised in a specific way.
Explanations
- Beim Einsatz von mehreren Tankautomaten sind die Tankautomaten nicht untereinander verbunden und wissen nicht wer an den anderen Tankautomaten getankt hat.
- Beim Periodenlimit, welches über Autopoll verwaltet wird, wird der Abtankungswert immer neu berechnet, d.h. es müssen vor der Berechnung immer alle Tankungen vorliegen.
- Bei der Eingabe von KM-Ständen am Tankautomaten, müssen erst alle Tankungen vorliegen, bevor der höchste Kilometerstand im Fahrzeug hinterlegt und dieser Kilometerstand dann an alle Tankautomaten gesendet werden kann.
Polling process when working with limits and/or mileage input at the card reader
Polling 1
- only polling of all fillings from all card readers
- NO polling of cards
- When all fillings are being polled from all the card readers, the card limits will be calculated anew and/or the mileage values (only higher values) are being saved in the corresponding vehicles.
Polling 2
- transmitting of the changed cards only to all card readers
Periode start when working with card limits
- At the start of a new periode (e.x. on the first day of a month when dealing with a monthly limit), the card limits change just because a new month starts. The card limits will be set to the starting value. So at the start of a periode it is absolutely necessary to execute "Polling 1" first and afterwards "Polling 2" as explained above. But when executing "Polling 2" at this moment, ALL cards have to be transmitted to ALL card readers.