EN mileage control

in Arbeit IN ARBEIT 

Preamble

As preparartion for a following vehicle consumption analysis, it is possible with this function to check the mileage values of all vehicles on correctness and the processibility of the subsequent analysis before executing the vehicle consumption analysis. During that pre-analysis it is possible to directly correct mileage values in the corresponding fillings if necessary. This function is recommended for customers with a lot of vehicles and/or often wrong entered mileage values.

Requirements

• at least Autopoll LIGHT
• activated and configured Vehicle consumption analysis

Menu call up

Settings

from: selection from which date on the vehicles should be checked

to: selection to which date the vehicles should be checked

Fehlertoleranz (%) (fault tolerance): input the tolerance value as percentage rate

Results

Selected periode 01.01.2016 - 31.03.2016 with configured analysing values (analyse profile) of min. 10 km to max. 4000 km.

To present a more detailed picture of the mileage situation (mileage history) of the vehicles, not only the fillings of the vehicles of the selected periode are being displayed (in black), but also the fillings of the vehicles before the selected periode (in light grey).

Driven mileage not calculable

Case 1

Reason: No mileage values have been entered manually or at the card readers.

Guess: For this vehicle the input of mileage values never had been active.

Solution 1: Deactivate the vehicle consumption analysis for that vehicle.

Solution 2: Check the card to which this vehcile is assigned to, activate the mileage input in the card, send the card to the card reader and re-enter the mileage values in the existing fillings manually if possible.

Case 2

Reason: Die Kilometerstände sind zwar in einer korrekten, aufsteigenden Reihenfolge, aber die Kilometerstands-Differenz zwischen der markierten Tankung und der Tankung davor liegt ausserhalb der Grenzwerte die im Analyseprofil eingestellt wurden.

Guess: Eine Tankung wurde nicht erfasst, evtl. eine Tankung an einer Fremdtankstelle.

Solution 1: Kontrollieren, ob eine Tankung fehlt. Die fehlende Tankung nacherfassen.

Solution 2: Kontrollieren, ob das Analyseprofil angepasst werden muss.

Driven mileage too high

Reason: The mileage values are not in a correct ascending order: The mileage of the marked filling is too high.

Guess: A transposed digit while entering the value at the card reader. Instead of 3, 8 was being entered.

Solution: Correct the mileage value like explained under item 6.

Driven mileage too low

Reason: The mileage values are not in a correct ascending order: The mileage of the marked filling is too low.

Guess: A problem while entering the value at the card reader. Maybe the 2nd or 3rd digit was forgotten to enter.

Solution: Correct the mileage value like explained under item 6.

Mileage correction

Open the marked filling with a double click.

Den Wert im Feld "KmStand" korrigieren und die Tankung abspeichern.

Wird der Haken "geprüfter KmStand (FzAnalyse)" gesetzt wird der KM-Standswert so wie er eingegeben wurde akzeptiert.

Wird der Haken nicht gesetzt, muss der neue Km-Stand in die Regeln passen.